Products
Eco - Lift
always a good choice
Tube head section is identical to the tube foot section (this helps your stock levels). Four types of slatted bed frames can be made with the same mechanism- neck-section integrated in inner frame (01)
- neck-section inside the outer frame (02)
- telescopic neck-section inside the outer frame (03)
- individual adjustment of the neck-section by means of a third motor (04)
For all models the same tubes can be used. The only difference is the use of different accessories for the head section (again, helps to reduce stock levels). Eco-Lift .05 - with backwards moving back-section. Other variants upon request.
Eco - Lift 1
neck-section integrated in inner frame
The particularities:
- quick to assemble as only few accessories.
Several parts are premounted - plastic washers avoid metal abrasion and noise
- possibility to use comfort system for shoulder section
- foot section inclined sensibly in raised position
(appr. 1O° when using a motor course of 69). - attractive design
- motor is fixed in the centre of the slatted bed frame.
This means the same cable length for the hand set
for both bed frames in a double bed.
Finish epoxy coated beige RAL 1015
Eco - Lift 3
telescopic neck-section inside inner frame
The particularities:
- quick to assemble as only few accessories.Several parts are premounted
- plastic washers avoid metal abrasion and noise
- possibility to use comfort system for shoulder section
- foot section inclined sensibly in raised position (appr. 1O° when using a motor course of 69).
- attractive design
- motor is fixed in the centre of the slatted bed frame. This means the same cable length for the hand set for both bed frames in a double bed.
- Finish epoxy coated beige RAL 1015
Eco - Lift 4
individual adjustment of the neck-section by means of a third motor
The particularities:
- quick to assemble as only few accessories. Several parts are premounted.
- plastic washers avoid metal abrasion and noise.
- possibility to use comfort system for shoulder section
- foot section inclined sensibly in raised position (appr. 1O° when using a motor course of 69).
- attractive design
- motor is fixed in the centre of the slatted bed frame. This means the same cable length for the hand set for both bed frames in a double bed.
- Finish epoxy coated beige RAL 1015
Eco - Lift 5
with backwards moving back-section for an ergonomically favourable bed frame
The particularities:
- quick to assemble as only few accessories. Several parts are premounted
- plastic washers avoid metal abrasion and noise
- possibility to use comfort system for shoulder section
- foot section inclined sensibly in raised position (appr. 1O° when using a motor course of 69).
- attractive design
- motor is fixed in the centre of the slatted bed frame. This means the same cable length for the hand set for both bed frames in a double bed.
- even when large disc caps/plastic pods are used, the back- and sitting-sections do not touch or compress
- please note that the frame partitioning for the Eco-Lift .05 is not the same as for the other Eco-Lift-versions: for ergonomical reasons enlarged back-section
- the back-section moves away from the sitting-section when the mechanism is raised. The movement is similar to that of a telescopic neck-section supporting the whole mattress even in the sitting-position
- Finish epoxy coated beige RAL 1015